ANTDOGG;419833 said:
Alex78 I think they should fit around the X-40 as the measurements for the one I paid for is 4 inches long by 3 inches wide which was the first link for $5.50 and I also measured myself (but when you click the second link it says those 2 are also 4" by 3" for $7.50 or something so they seem like their the same but don't know why they have 2 different prices you can always contact them though on their website). I'm sure you would have to squeeze it on and only on the first 2 ridges I would assume but I don't have a X-40 yet so you would have to check it out on your own unless someone else knows but they are pretty darn stretchy so my guess is yeah. Willy3 if your out of the US make sure to check with them they have their contact information on the site other then that they are trustworthy, if they weren't I wouldn't have posted this on the forum and told you my sleeves never came but as you can see from the pictures they did come and I do use them with my Bathmate. I just posted the straight links from their website so if you google "Extreme Restraints" it will pop up there too if you worried.

Wrote Extreme Restraints and their response was simply they were the same.
The extra $ was for the packaging, one in a loose bag and the other in a plastic package.
 
Noi one has written on this thread for about 10 days so here goes. Some time ago, I wrote in favor of Colt sleeve. I must take that back as I have not found it to be better than no sleeve. It ripped and then when I bought their silicone and smeared it on the end of my X-40 with sleeve attached, it did nothing to make better adherence of skin to sleeve. the Bathmate still slid around and eventually leaked air into the cylinder destroying the seal. OK. Half way through my session I took the sleeve off and pumped just with X-40. Much better.

Secondly. I believe there are many out there who have bad luck with the sponge ring on the base coming off. I also had that experience since as you all know who have had this, that there is double-sided tape between the rubber gaiter and sponge ring. OK, I tried double sided tape again and forget it. I have found something that makes me cautiously optimistic that makes me think that I may have found the solution. Most glues don't like rubber. I finally found one that does. It is Gorilla Glue, made in the U.S. I found it in my local little building supply but I would think it would be available in Loews or Home Depot or the like. Once again: Gorilla Glue, from the Gorilla Glue Company in Cincinnati OH. The bottle gives a 800 number and web page as follows: 1-800-966-3458, www.gorillatough.com . The bottle says it is good for foam and after one session following the gluing, I found that it worked and has not come off, I am as I say cautiously optimistic. The foam appears to be stuck. By the way, I agree with the cautionary note: Use gloves. You can buy medical gloves at your local drug store for probably 50 cents a pair. Do not get glue on your skin. I will re-evaluate adherence in about a week.

Yes, I found I had better suction without the sleeve and the "pain" of the rubber right on the skin i.e. with no sleeve was not bad. Different brands of sleeves are on route and maybe things will be different with a different sleeve.
 
Kimodo;433028 said:
Gorilla Glue, from the Gorilla Glue Company in Cincinnati OH.

My family does their product printing:)
 
doublelongdaddy;433031 said:
My family does their product printing:)

DLD,

Check out my Bathmate 2.0 Blog. I thought of a solution to the skin and ball sac irritation problem with the Bathmate. Let me know what you think!


BB
 
Do you have to pump erect to get into the sleeves? I usually pump from flaccid because I have trouble getting erect in the shower but I also have problems with the crushing of my base as its naturally about 6 EG but gets even bigger when I pump.
 
chazster;434204 said:
Do you have to pump erect to get into the sleeves? I usually pump from flaccid because I have trouble getting erect in the shower but I also have problems with the crushing of my base as its naturally about 6 EG but gets even bigger when I pump.

You kind of need to be erect to get through the sleeve but once in you can pump flaccid.
 
People mention that it's hard to fit through the sleeve. That was my first thought when I got the sleeve. I said to myself, "there's no way I'm going to fit through there" and I'm not nearly as girthy as some of you guys so the first thing I did was fit it securely, then fold out the narrow opening, get a pair of scissors and cut the sleeve so that there was no problem going through. I don't see any downside to it, is there some reason that you guys haven't cut the opening to make it easier to fit through?
 
So does this stop your balls from being suck up to the ribs and making them hurt for hours and fuck your sesion up and make you want to send it back? Because thats where I'm at right now. I cant even pump very much at all. Not reaching any expantion at all. I'm like 5 1'/4 girth before and the same after. I've tried to pull my balls back with no luck, as soon as I let them go they get sucked right up against the rim. I have tried moving the pump up a bit to keep my dick away and I get bad suction and still no expantion. I need some help or this damn thing is going back asap.

007
 
These can also be purchased thru Amazon. I have Amazon Prime so the shipping is free. Can't beat that!
 
username007;443176 said:
So does this stop your balls from being suck up to the ribs and making them hurt for hours and fuck your sesion up and make you want to send it back? Because thats where I'm at right now. I cant even pump very much at all. Not reaching any expantion at all. I'm like 5 1'/4 girth before and the same after. I've tried to pull my balls back with no luck, as soon as I let them go they get sucked right up against the rim. I have tried moving the pump up a bit to keep my dick away and I get bad suction and still no expantion. I need some help or this damn thing is going back asap.

007

3 solutions, include your scrotum in the pump as Redzulu does and pump the entire package. You could also use a large cable clamp to keep balls back so they do not get sucked in. Lastly I suggest doing the testicle health massage and stretch prior to your workout, this will ensure the balls hang low enough to not get in the way.
 
PantySnifferLOL;442394 said:
People mention that it's hard to fit through the sleeve. That was my first thought when I got the sleeve. I said to myself, "there's no way I'm going to fit through there" and I'm not nearly as girthy as some of you guys so the first thing I did was fit it securely, then fold out the narrow opening, get a pair of scissors and cut the sleeve so that there was no problem going through. I don't see any downside to it, is there some reason that you guys haven't cut the opening to make it easier to fit through?

Very good point~!
 
ordered a sleeve this morning. felt like it was a smart thing after months of rings of death (which made hardcore stretches hardcore in the wrong way) and the foam ring came off this week. pretty excited about after reading all these great experiences!
 
Does the sleeve give you more suction and increase pressure?
 
ryan62468;446014 said:
Does the sleeve give you more suction and increase pressure?

Yes to both:) The sleeve is the ultimate modification for the Bathmate.
 
Initial first day review...

Not impressed but as with most Penis Enlargement equipment, I imagine there is always the trouble of figuring out how to make it work with your body. My intent here is not to knock the sleeve but to share my frustrations in trying to figure it out and making it work with the Bathmate. Hopefully someone can see what I'm doing wrong and help me out. I'll run through the attempts I've made with using the universal sleeve today. (fyi: I use the Herc)

1. Put the sleeve on the Bathmate up to the second rib. Lub up the sleeve where my dick was going to have to fight its way through. Filled up the Bathmate with the tighter sleeve portion inside the Bathmate. I normally put the Bathmate on standing in the shower and had my prior technique down perfect to where I never had bubbles. First attempt with the sleeve on, BIG BUBBLES and couldn't keep suction. Air leak or something just creeping up the shaft. Ok, I'll try again. As I expected, this wasn't going to be perfect the first time.

2. This time I thought maybe you just need to get up the max pressure right away to set the suction. So this time, did almost the same thing but I gave some deep presses on the Bathmate to aim for max pressure right away. Medium bubbles this time. Now I'm thinking the bubbles are stemming with how I fill the Bathmate with water. Maybe, it's not really full when I think it's full. Within a couple mins of having some steady suction, I begin to get another steady stream of bubbles and losing suction/pressure. Ok, got a couple ideas on what I can change this time...

3. Now I have the sleeve inside out you can say. This way I can fill the Bathmate up with water and the few inches of sleeve that is inverted now. This time I'm also going continue to press the nipple of the Bathmate until my dick gets a little ways into the sleeve and the Bathmate, with the intent to set some suction up before getting to the pump action. Still getting some medium bubbles and losing suction shortly but this felt and looked like I was getting closer to the mark. Next idea, fresh trim of the pubic hair.

4. Now I have trimmed my hair. Wasn't much there to begin with. It was already at a trimmed length. This length would have never been an issue in the past with the comfort ring or with it off. But I thought to myself that this sleeve is likely going to seal better to a skin than to some stubble. Got my plan put to action and it took two tries before I could get to where the seal held without any air leaking in but still couldn't get it perfect without bubbles. Wore for about 10mins. Didn't have any ring pinching, which was lovely but taking so much tries to get a suction that didn't lose pressure was depressing.

So the problems that I'm still dealing with is a bubble in the beginning. This might not be the case if I did this suBathmateerged in a bath but it's not that easy for my to get erect in a bath. I usually get hard at the computer and then go to the bathroom with my erection and get into the Bathmate. I'm also disappointed in the suction. I was expecting to have this awesome suction that I kept reading about that would allow to get some hard pulls on the hardcore stretches but I'm struggling just to keep suction by having to keep some pressure on the Bathmate and pushing against me.

Does anyone have ideas or suggestions?
 
Practice has paid off. Paired with extra time wearing an ADS I was able to comfortably keep pumping past my recent peaks in the Bathmate. I wouldn't have kept pumping if I wasn't already 20mins in and knowing this progress brings FR like an ice cream truck brings fat kids. Sure enough I got some killer FR.
 
Back
Top Bottom