I have the sleeves and cannot get a good pressure when using it! I ripped the comfort ring off the bottom of my Bathmate and still cannot get a good seal/pump pressure :(

Anyone know if I can get a new comfort ring from Bathmate?
 
Dickleaker;426871 said:
I have the sleeves and cannot get a good pressure when using it! I ripped the comfort ring off the bottom of my Bathmate and still cannot get a good seal/pump pressure :(

Anyone know if I can get a new comfort ring from Bathmate?

Where do you lose pressure? What exactly is happening?
 
At the base DLD...when I take it off I can get great pressure but not with it on.
i ripped the comfort ring off my Bathmate so it would be nice if the sleeve worked cause now without it it hurts too much.
doublelongdaddy;426893 said:
Where do you lose pressure? What exactly is happening?
 
just got my sleeves 2day....just took the Bathmate off and i must say i def like the sleeves ALOT!!
AND they also fit the X-40

==== but i had a hell of a time getting my dick into the sleeve.....must be hard with plenty of lube.....hopefully it stretches out a bit like my women lol
 
chuck89gt5.0;427421 said:
just got my sleeves 2day....just took the Bathmate off and i must say i def like the sleeves ALOT!!
AND they also fit the X-40

==== but i had a hell of a time getting my dick into the sleeve.....must be hard with plenty of lube.....hopefully it stretches out a bit like my women lol

Sounds like you can have sex with it now!
 
I bought this as soon as I saw this thread & boy was it a MISSION to get my penis head outta that little hole the first time I used it :/ Next time I'll have to put the lube at the top also & see if that works better for me, lol.
 
Alright finally I can make an update. So I got the universal pump sleeves just an hour ago. I am not sure how to use it correctly though. I put the sleeve on and tried it out. I noticed in the Bathmate that almost half of my penis way through the tight hole at the end. This was bothering me as I would think that this hole in the sleeve should be at the base of my penis. I am not sure exactly how to adjust it correctly so that it's comfortable. I also noticed that this doesn't seem to suck on the base of my skin at all and the bottom doesn't attach to me like it did with the foam. It feels different but I'm not sure if this is the right way for it to function. Any feed back on this modification would be highly appreciated. I'd like to know if there or other modifications I can do to make this work right. Thanks! :D
 
i am having a hell of a time getting my dick thru the hole of the sleeve, i even cut slits down the sides a bit to make it a lil easier but its still hard to get my dick thru even with lube
 
Alex 78, I was surfing and found what I think you want to look at. Colt has a sleeve that works on pumps that are no smaller than 3" and not larger than 4 3/4" diameter. Sounds perfect for X-40. I am including the links that I found. They may end up not hyper-linked but you can cut and paste and see the ads. They are more than the original ones mentioned above but I think they would fit like the proverbial glove. I have to buy mine yet but I'll be buying two just in case one breaks initially. It looks like it will fit totally over the foam rubber base of the gaiter. If you get one, post your experiences as I will certainly be doing so. Good luck, all of you working with the X-40.


http://aruzzo.com/p-929-colt-silicone-3-donut.aspx
http://www.theadulttoyshoppe.com/Colt-Silicone-3-Inch-Donut-SE6793.htm
http://www.vitadigest.com/ce-colt-sleeves-3-25.html
 
So the main point of these is to prevent the rings + pain at the base of the penis?

Because I've been experiencing that lately - Should I get some sleeves?
 
PumpSon!;428973 said:
So the main point of these is to prevent the rings + pain at the base of the penis?

Because I've been experiencing that lately - Should I get some sleeves?

Yes you should:)
 
How are the sleeves used by OP ?

I can get them or get a single sleeve, jus wondering as the single seems more durable, but if these ones have been proved by you guys to be pretty decent....
 
I am still waiting for my Colt 3.25 sleeves but in the meantime, I have tried getting hard using a water-based lube then inserting into the X-40. n Oh, yes, I shaved all off around so it is smooth. The X-40 appears to stick and as I expand during the first 3 minutes to max the rings don't bother me. the slippery surface works. I am still excited in that I will be able to try sleeves soon (after May 10 they are to arrive).
I could be wrong here but as much as the universal will fit X-40, the stretching may be horrendous and this might leave you a strenuous task of inserting because or the tension on the membrane. The larger sleeve may be easier to slide through.
 
Got my sleeves today

Just a warning, uncircumcised bros. You might need to cut some slits in the top of the sleeve and llube up to get through otherwise your skin gets trapped behind the sleeve rim and as you pump it stretches it further and further back.

Hurts!

I cut slits and lubed up and had the best session. No more pain and it turns out it WAS just ball skin getting sucked up - plenty of time before I max this out


Ps: you might not be able to pump as high as it gives a better suction/seal with the sleeves!
 
The colt sleeve SUCKS! I would suggest you do NOT buy!
 
I like the sleeves that the O.P uses ( the black and tan ones)
 
I've been using the sleeves for a few weeks now and I really like them. You do have to cut slits so your penis can go through it. I have had no issues with pain at the bottom of my shaft anymore. Highly recommend these
 
chuck89gt5.0;430585 said:
The colt sleeve SUCKS! I would suggest you do NOT buy!

I appreciate that each of us is different. Having said that, I received my Colt sleeve yesterday and after installing it, I had to do some experimenting.

First off, I shower rather than bathe so here is my take. Put a significant amount of silicone lube on the flat surface that will be against your skin and lube the inside of the cone for easy insertion. The colt was hard to get on first off but once it was on, my next error was to leave the cone shaped sleeve in the BathmateG. The top did not fill completely so when I inserted into the sleeve, a lot of air was trapped and I did not get a good start.

Second - starting over again and pulling the cone out so it is reversed so to speak, I filled the BathmateG through the opening in the cone until the water came out signalling a full chamber. Recognize that there will be negative pressure in the chamber so you want a good seal between you and the Bathmate - lots of silicone. Air will want to sneak in during the session and the sponge rubber is now out of the picture. Most silicone lubes are a very light viscosity for personal use. Colt advertises one specifically for this sealing process when pumping. I suspect it is much more viscous and will provide a better seal. I'll let you know after I receive some and experiment with it. OH yes, for a good seal, remove all hair for at least one inch around the base of your penis so it is silicone straight onto skin.

One more thought - I am almost big enough girth-wise and am looking for more length so I found yesterday that the Colt being stiffer kept me from expanding as much as when there was nothing and I felt that the length was next in line. I have only had one session but am very much in favor of the Colt as it finally worked for me including keeping my testicles from being sucked in or hurt.
 
I used the sleeve to my shirt the other day, it was very comfortable but no suction:) JK
 
chuck89gt5.0;430585 said:
The colt sleeve SUCKS! I would suggest you do NOT buy!

Starting to agree with this user. I have not had allgthat high degree of success lately with Colt. I am not going to comment further until after some more styles arrive and I have time to evaluate. I am definitely stuck with X-40 I believe as my girth when erect before going into Bathmate is 6" mid shaft and 6.5 at my base. Herc is too painful certainly without a sleeve which I don't have for Herc. Is there anyone out there who perhaps has my dimensions and still uses his Herc??? I would love to hear from him.
 
Back
Top Bottom