Unfortunately getting a silicap2 on my flaccid penis is quite the challenge. Ugh. :)
 
Not as easy as it used to be. :(

Another question - love the durosleev's. But actually a bit too tight on me. Any plans to make 1.125 or even a 1.25" ID sleeve?

At this point I would say no as we have a lot of things cooking right now. But sometime in the future we will be releasing other sizes. You can try to pre-stretch yours as this may work.
 
Ok - probably last question... I like my PF's waist belt design. (Except the foam loop only lasts so long - it's not quite resilient enough). Any plans for something like that? The two Velcro belts together sort of work fine - but not as robust as the PF belt concept.

Thanks again!
 
The belts are 39" and 49" long. We just realized they only sent us 39" belts. We will have the 49" in next week.

The plastic tension wheel shouldn't be coming off. Are you adjusting in the proper direction?
I have had the same problems as just grow has. The belt is too short and I have a problem with wheel coming off the bungee cord locking part. In reality only one end needs to be adjustable so i wrapped a rubber band around the end that keeps coming off and use the other end for adjusting tension. I do like the ankle/leg straps and other then the wheel off the bungee, I do like the fact it is adjustable. Are you sending the larger belt to people who already bought one?
 
I have had the same problems as just grow has. The belt is too short and I have a problem with wheel coming off the bungee cord locking part. In reality only one end needs to be adjustable so i wrapped a rubber band around the end that keeps coming off and use the other end for adjusting tension. I do like the ankle/leg straps and other then the wheel off the bungee, I do like the fact it is adjustable. Are you sending the larger belt to people who already bought one?

Yes, we have longer belts in stock. Just PM me your order number and we will get one out to you. For the wheel that is popping off, if it's the larger hook you are having issues with, we have a mod for it.

20190919_170705.jpg20190919_170750.jpg
 
Free SiliPad3

Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.

For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .
 
Yes, we have longer belts in stock. Just PM me your order number and we will get one out to you. For the wheel that is popping off, if it's the larger hook you are having issues with, we have a mod for it.

View attachment 1824213View attachment 1824214
Nice I knew you guys would come up with something quick!
Thank you.
 
Free SiliPad3

Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.

For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .
@Lightning this sounds very promising to continue to minimize fluid retention as much as possible.
I would like to try this new Silipad/cap.
 
Free SiliPad3

Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.

For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .

Could you go without the silicap for this one? I’m having issues using the silicap and just end up taping my glans.
 
Free SiliPad3

Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.

For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .


I truly hope the brotherhood takes advantage of these offers that you’re constantly making.
 
Free SiliPad3

Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.

For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .
SP3- No More SCAPS !!
 
Free SiliPad3

Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.

For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .
in for this
 
We’re giving these away for free so I hope people get involved it’s a very generous offer
 
We’re giving these away for free so I hope people get involved it’s a very generous offer
It is indeed. Any pictures of the SiliPad3? I am having trouble visualizing it...
 
Back
Top Bottom