How far are you going into the silsistretcher? Looks like u need to go further in I turn mine about how way up the silsistretcher or more then enter it so all/most of my gland/ head is in it

I gained 1/8 of an inch in about a month & 1wk with 513 hrs use but had issue w silistretcher n got a new one sent out put haven't used it yet some life stuff came up. Gonna try n get back on pe wagon tonight
@85ray Great job on the growth! (clap)

How do you wear the SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger for tension; on the knee, around the waist, or Silistrap pointed up?
 
SiliStretcher2 starts shipping today! We have 1.25" and 1.5" diameters available now.

View attachment 1822044

Introducing the new SiliStretcher2

We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS /Hanger combo even better!

New features
  • Reduction to the overall length for stealth and strength
  • A new thicker acrylic formula for strength
  • New long lasting SiliSleev Duros to intensify your stretches
  • Improved vacuum piston system for grip
  • New deeper SiliPads to control fluid retention
  • DuroBand to add a layer of protection around the SiliStretcher rim
  • New 1.25" (3.2mm) diameter available
The new vacuum piston knob is half the size of the original coming in at 1" (25mm) long. This cuts down the overall length of the SiliStretcher to make it even more stealth and reduce friction on the handle and acrylic bell when hanging heavy weight and intense stretching . This also helps eliminate kinking when side stretching .

Our new thicker acrylic formula system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher .

Our new semi transparent SiliSleev Duros (DuroSleevs ) will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis. Users are effectively hanging up to 30lbs with the SiliStretcher2 and DuroSleevs.

The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.

We've added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleevDuro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher . This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.

We've added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.

Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply). Email sales@mattersofsize.com with your name and email that you used on your original order.
This is awesome!
 
I just saw the 2.0 is out I'm very excited as I was getting a lot of pinching w the original which wouldn't even be that bad if I could take it off right away but I'd usually be at work or something and not be able to get away and just have to suck it up for a while
So I can't wait to try it out n see how it works bc I am pretty much across the waist wearer
 
I just saw the 2.0 is out I'm very excited as I was getting a lot of pinching w the original which wouldn't even be that bad if I could take it off right away but I'd usually be at work or something and not be able to get away and just have to suck it up for a while
So I can't wait to try it out n see how it works bc I am pretty much across the waist wearer
I'm just unsure which 2.0 to get the original size I use 1.5 or the new smaller 1.25
 
This sounds like it’s a welcome improvement for everybody so I’m very excited.
 
This sounds like it’s a welcome improvement for everybody so I’m very excited.

It surely is
giphy.gif
 
This is the new SiliPad2 that will start shipping with the SiliStretcher2. As you will see in the comparison to the original SiliPad, the SiliPad2 comfort pad is now deeper and softer to conform to the glans of the penis. The new SiliPad2 was designed to minimized fluid retention and add more control for gripping. You may no longer need a SiliCap when using these (ymmv).

The SiliPad2 will start shipping in two weeks and will be available for the 1.25" (3.2cm) and 1.5" (3.8cm) SiliStretcher2.

silipad2-comparison.jpg
silistretcher2-silipad.jpg
 
Last edited:
This is the new SiliPad2 that will start shipping with the SiliStretcher2. As you will see in the comparison to the original SiliPad, the SiliPad2 comfort pad is now deeper and softer to conform to the glans of the penis. The new SiliPad2 was designed to minimized fluid retention and add more control for gripping. You may no longer need a SiliCap when using these (ymmv).

The SiliPad2 will start shipping in two weeks and will be available for the 1.25" (3.2cm) and 1.5" (3.8cm) SiliStretcher2.

View attachment 1822069
View attachment 1822070

Loving it this is so awesome!
 
I'm just unsure which 2.0 to get the original size I use 1.5 or the new smaller 1.25
@85ray That is a good question, but I guess you have to see how close you are to the edge of the existing one you have.
I thought about the same thing when the 1.25 came out, but I stuck with the 1.5 because fits just right for me right now with a slight room for growth.
 
This sounds like it’s a welcome improvement for everybody so I’m very excited.
This is awesome @DLD how you guys will continue to make improvements. The fact that there is feedback and you really consider the information for changes for better product is amazing to me. Some may ask for feedback, but wouldn’t really consider change, but you guys are perfecting it for the brotherhood! (clap)
 
This is the new SiliPad2 that will start shipping with the SiliStretcher2. As you will see in the comparison to the original SiliPad, the SiliPad2 comfort pad is now deeper and softer to conform to the glans of the penis. The new SiliPad2 was designed to minimized fluid retention and add more control for gripping. You may no longer need a SiliCap when using these (ymmv).

The SiliPad2 will start shipping in two weeks and will be available for the 1.25" (3.2cm) and 1.5" (3.8cm) SiliStretcher2.

View attachment 1822069
View attachment 1822070
I received my Silistretcher2 and the Vacuum bell is more heavy duty.
Mine came in with two short Duros.
I am really digging the shorter Duro sleeve.

I had posted before that the long wider blue sleeve was the sweet spot for me because the long duro was a little harder for me to put on, but this short duro is great!
The grip is great!

Once I get the Silipad2 I will give an update.
Just seeing how it is built I think this will help in comfort and any brothers that may have been having any glans tip fluid issues.

Until you get the new Silicap2 remember small pinhole on the tip of the Cap to minimize fluid build up. I didn’t come up with the pinhole idea, but it does help.

The more and more you put on the Silistretcher it gets easier to get into a routine.

It’s grow time!
 
I received my Silistretcher2 and the Vacuum bell is more heavy duty.
Mine came in with two short Duros.
I am really digging the shorter Duro sleeve.

I had posted before that the long wider blue sleeve was the sweet spot for me because the long duro was a little harder for me to put on, but this short duro is great!
The grip is great!

Once I get the Silipad2 I will give an update.
Just seeing how it is built I think this will help in comfort and any brothers that may have been having any glans tip fluid issues.

Until you get the new Silicap2 remember small pinhole on the tip of the Cap to minimize fluid build up. I didn’t come up with the pinhole idea, but it does help.

The more and more you put on the Silistretcher it gets easier to get into a routine.

It’s grow time!


Very positive review.
 
This is awesome @DLD how you guys will continue to make improvements. The fact that there is feedback and you really consider the information for changes for better product is amazing to me. Some may ask for feedback, but wouldn’t really consider change, but you guys are perfecting it for the brotherhood! (clap)

Probably because we do is PE 24/7 365! ?We’re not looking to make a fast buck we’re looking to put out the best possible line of PE equipment. To do this we need to get feedback, listen to it, and evaluate it and if it makes sense implement it at any cost. We are also interested in creating unique tools that have not been thought of yet. So you’re correct, we use so you’re correct, we use feedback as a way to improve our product line to be the best equipment available.
 
@85ray That is a good question, but I guess you have to see how close you are to the edge of the existing one you have.
I thought about the same thing when the 1.25 came out, but I stuck with the 1.5 because fits just right for me right now with a slight room for growth.
I'm just wondering if my glad will still get enlarged the same as the original if so I'd probably stick w 1.5
 
I'm just wondering if my glad will still get enlarged the same as the original if so I'd probably stick w 1.5
@85ray I’ve been using the Silistretcher2 today for a couple of hours split in 1 hour sessions and every time I took it off there is definitely a swell. I think if you were using the 1.5 Vacuum bell and it wasn’t an issue for you then I would stick with that size.

I had the 1.5 and decided to stay with the same size and it is good to go.
 
@85ray I’ve been using the Silistretcher2 today for a couple of hours split in 1 hour sessions and every time I took it off there is definitely a swell. I think if you were using the 1.5 Vacuum bell and it wasn’t an issue for you then I would stick with that size.

I had the 1.5 and decided to stay with the same size and it is good to go.
Only issue I had was pinching on side after few hrs
 
Who do original silistretcher owners email for the complimentary silistretcher 2.0?

sales@mattersofsize.com with your name and email that you used on your original order.
 
Last edited by a moderator:
Back
Top Bottom