youknowme123321;607186 said:
i feel like this is something that would be pretty easy for someone who know how to do it to design. it's not to complicated of an action. the most costly part would be designing into a PE tool

And the molds that would need to be made along with the design prices, it could be a very expensive risk.
 
doublelongdaddy;605795 said:
If we had unlimited time and money we could reinvent the entire industry!

Tell me what to make I can do it in India or from china I travel on and off to china for my business also.
 
master_mind;607362 said:
Tell me what to make I can do it in India or from china I travel on and off to china for my business also.

The biggest expense we are facing is the molds that need to be cast for the new ADS, if you have a place that can do this work at a good price it would be very helpful. Molds cost a lot of money and we are going to need two made.
 
doublelongdaddy;607505 said:
The biggest expense we are facing is the molds that need to be cast for the new ADS, if you have a place that can do this work at a good price it would be very helpful. Molds cost a lot of money and we are going to need two made.

Molds no problem can be made. Cast iron, aluminium, gun metal, copper, plastic any type products can be casted. Now tell me ads in which of the above material.

Last time I got a mold made for my industry for a plastic product ( PPCP NAME OF THE PLASTIC ). Dimensions of the product length 8 inches , outside diameter 48 mm , inside diameter 42 mm.
 
www.sds-fk6.com639 × 439 check this for pictures. Tomorrow I will show pictures of my moulds and the injection moulding machine making various parts. You tell me what to make and it's possible.
 

Attachments

  • image.jpg
    image.jpg
    12.2 KB · Views: 0
Last edited:
master_mind;607638 said:
www.sds-fk6.com639 × 439 check this for pictures. Tomorrow I will show pictures of my moulds and the injection moulding machine making various parts. You tell me what to make and it's possible.

I fact I will put a vedio of injection moulding machine and how moulds are made.
 
master_mind;607640 said:
I fact I will put a vedio of injection moulding machine and how moulds are made.

I will have LIGHTNING get in touch with you, thanks for your help. How much did you pay for the mold you had made?
 
doublelongdaddy;607641 said:
I will have LIGHTNING get in touch with you, thanks for your help. How much did you pay for the mold you had made?

As my product was simple the mould costed me 1200 dollars. You give me a drawing with some dimensions then I can tell you the cost. And the material of the product.
 
master_mind;607659 said:
As my product was simple the mould costed me 1200 dollars. You give me a drawing with some dimensions then I can tell you the cost. And the material of the product.

Will do.
 
doublelongdaddy;607028 said:
We have considered these things in the new ADS we are making but have found nothing that could perform that function. It would have to be created from scratch and that would be a huge investment. Maybe after we release the first version and it is successful we could consider it on future models.


When you're referring to an ADS, you're referring to an extender correct? Not an anti-turtle device?


I think you all @ MOS should had jumped on the extender bandwagon long ago.
The advanced devices market is much lower to target compared to extenders (which is the household device, then pumps).
 
master_mind;607697 said:
Ok.

Phallosan can also be made. But I think it's patented.

https://www.google.com/search?site=&tbm=pts&source=hp&q=phallosan

Their site says something about the condom sleeves. Their sleeves suck so it's something one shouldn't piggy-back off of.
PMP also has a vacuum device w/ a rod setup and strap. Their pump is external though.
Something like silicone from abs/xleeve/ETC is having better results in strength/preventing air loss from the people who've used them. Also used for vac hanging as well. It's probably the best item currently for vac systems.
 
Last edited:
smerc;607702 said:
When you're referring to an ADS, you're referring to an extender correct? Not an anti-turtle device?


I think you all @ MOS should had jumped on the extender bandwagon long ago.
The advanced devices market is much lower to target compared to extenders (which is the household device, then pumps).

Not an extender an all day/all night stretcher. We are not trying to improve on an existing device we are looking to create a new device completely. We want a tool that can be used for 24 hours a day with ultimate stretch and perfect comfort.
 
doublelongdaddy;607706 said:
Not an extender an all day/all night stretcher. We are not trying to improve on an existing device we are looking to create a new device completely. We want a tool that can be used for 24 hours a day with ultimate stretch and perfect comfort.

I don't mean an extender in the traditional sense like the SG. More of an extender as in something that actually extends via stretching (day and safe for night/sleep use).
 
smerc;607703 said:
https://www.google.com/search?site=&tbm=pts&source=hp&q=phallosan

Their site says something about the condom sleeves. Their sleeves suck so it's something one shouldn't piggy-back off of.
PMP also has a vacuum device w/ a rod setup and strap. Their pump is external though.
Something like silicone from abs/xleeve/ETC is having better results in strength/preventing air loss from the people who've used them. Also used for vac hanging as well. It's probably the best item currently for vac systems.

You tell me I will make it.
 
smerc;607714 said:
I don't mean an extender in the traditional sense like the SG. More of an extender as in something that actually extends via stretching (day and safe for night/sleep use).

Exactly. We have ordered every conceivable option out there and are running our test against them all. When this comes out it will be all the rave because we can see where there is much room for improvement over all the competition. I think when beta testing begins people will realize just how much we put into this. As I said, I want to create a whole new method.
 
doublelongdaddy;607505 said:
The biggest expense we are facing is the molds that need to be cast for the new ADS, if you have a place that can do this work at a good price it would be very helpful. Molds cost a lot of money and we are going to need two made.

See here how moulds already made and the injection moulding machine.
 

Attachments

  • image.jpg
    image.jpg
    285.4 KB · Views: 0
  • image.jpg
    image.jpg
    272.3 KB · Views: 0
  • image.jpg
    image.jpg
    304.5 KB · Views: 1
  • image.jpg
    image.jpg
    287.9 KB · Views: 0
  • image.jpg
    image.jpg
    287.3 KB · Views: 0
I had a 2 million idea but I forgot what it was.
 
Thanks for the post MasterMind, I can see where a lot of the expense goes. Very educational.
 
Back
Top Bottom