Silisleeves work on the SizeDoctor for a much better stretch

REDZULU2003

Well-known member
Registered
Joined
Jun 3, 2003
Messages
20,066
It got me thinking yesterday after reading several threads about this device.

So, at night, alone :) I got the SizeDoctor from his cave, and decided to do some experimentation with the silisleeves (movember)


and the results......

full


I managed to fit inside without much problem at all, compared to when using the crap grey stock sleeves that come with the SizeDoctor, manufactured by the makers.

Vacuum was also much better, no loss like before, and I don't have the modified versions Mk1 with the new spring pin, or Mk2 with the pump style fitting.

Its certainly recommended if you got one of these things, to use a silisleeve on the head piece, by first removing the original grey sleeve, and place the thicker end on the silisleev over the SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger.

full


full
 
Excellent modification Red! I think you should move this to the main forum for a few days so everybody gets to see it.
 
Done
 
  • Like
Reactions: DLD

Thanks sir I think this is going to get a whole lot more action in the main forum and then we can move it next week. This is too good of a modification to not let everyone see.
 
Yeah, I mean it may look ugly compared to the stock grey sleeves, however, it works ALLOT better take it from me!!! this enables a guy to forget about messing around trying to figure out which sized grey sleeve he needs, as the silisleeve fits all.

The silicap is also easier to wear with this combo, tried that a few nights back. I dont personally like using the silicap in these, comfort, perhaps its down to me being uncut? although the silicap is vital when you use a pump with higher pressure, really clever for that.

So, if some SizeDoctor users could give this a crack, and report back it would be very nice to know how you feel about it.
 
Yeah, I mean it may look ugly compared to the stock grey sleeves, however, it works ALLOT better take it from me!!! this enables a guy to forget about messing around trying to figure out which sized grey sleeve he needs, as the silisleeve fits all.

The silicap is also easier to wear with this combo, tried that a few nights back. I dont personally like using the silicap in these, comfort, perhaps its down to me being uncut? although the silicap is vital when you use a pump with higher pressure, really clever for that.

So, if some SizeDoctor users could give this a crack, and report back it would be very nice to know how you feel about it.

Looks don’t matter what matters is what works. This is a great modification and should allow SizeDoctor users to get much better use of their ADS. There’s nothing that we are given that we do not improve upon, and it’s these modifications that help us plan revisions in the future.
 
Oh Red thank you very much for this. I have many silisleeves and I also have the size doctor. I'm going to do this and let you know how it goes.
 
I'm going to give this a try on Thursday or Friday and then report back. Though I don't have a silicap.
 
Wonderful. I think you will like it. You may find it tricky at first getting the silisleeve into that part of the silistretcher where the side rods are touching the head piece, but it does fit. Dont worry about it being really snug in that area, the rest will take care of itself.
 
Wonderful. I think you will like it. You may find it tricky at first getting the silisleeve into that part of the silistretcher where the side rods are touching the head piece, but it does fit. Dont worry about it being really snug in that area, the rest will take care of itself.

I will give it a try and then come back here to update you by Friday.
 
  • Like
Reactions: DLD
I went with this method again last night. Sadly it didn't work like the first time, beginners luck?
In the end I had to abandon the trial, and go back with the grey sleeves.

You may find it easier if using this trick to put the sleeve on your dick first, then to the silistretcher.

I spoke with Lightning about this, and he is more confident when the duros come out using this, but I may have been too over enthusiastic about this thread!

The problem is stretching the sleeve enough over the small space on the SizeDoctor, so your cock can get in. If you can get it going, its on fire, but it wasn't designed for it, so your going to struggle.

Now, with the pins inside all sizedoctors being modded to keep the pressure, the grey sleeves will be good again.
 
  • Like
Reactions: DLD
I went with this method again last night. Sadly it didn't work like the first time, beginners luck?
In the end I had to abandon the trial, and go back with the grey sleeves.

You may find it easier if using this trick to put the sleeve on your dick first, then to the silistretcher.

I spoke with Lightning about this, and he is more confident when the duros come out using this, but I may have been too over enthusiastic about this thread!

The problem is stretching the sleeve enough over the small space on the SizeDoctor, so your cock can get in. If you can get it going, its on fire, but it wasn't designed for it, so your going to struggle.

Now, with the pins inside all sizedoctors being modded to keep the pressure, the grey sleeves will be good again.

Hey, it was worth the time invested. Thanks for testing this modification you created.
 
I went with this method again last night. Sadly it didn't work like the first time, beginners luck?
In the end I had to abandon the trial, and go back with the grey sleeves.

You may find it easier if using this trick to put the sleeve on your dick first, then to the silistretcher.

I spoke with Lightning about this, and he is more confident when the duros come out using this, but I may have been too over enthusiastic about this thread!

The problem is stretching the sleeve enough over the small space on the SizeDoctor, so your cock can get in. If you can get it going, its on fire, but it wasn't designed for it, so your going to struggle.

Now, with the pins inside all sizedoctors being modded to keep the pressure, the grey sleeves will be good again.


Unfortunately, I don't have that pin with my own size doctor.
 
Unfortunately, I don't have that pin with my own size doctor.

Don't know if there's a hardware store around, but a low tension spring what is being used is relatively close to what's being used in several ballpoint pens. I think I got one down but lost my focus and was trying to fit the pin wrong way around, wondering why it doesn't work. :D One step at a time.
 
Don't know if there's a hardware store around, but a low tension spring what is being used is relatively close to what's being used in several ballpoint pens. I think I got one down but lost my focus and was trying to fit the pin wrong way around, wondering why it doesn't work. LOL One step at a time.

I'm trying to see if lightening can send me another silistretcher because mine got broken.
 
  • Like
Reactions: DLD
Thats an idea. SS is much better.
 
  • Like
Reactions: DLD
Back
Top Bottom