- Joined
- May 14, 2014
- Messages
- 168
Reason for PE
As stated in my initial posting, I have always been into some form of PE, generally do it yourself attempts by an engineering mentality.
I tried hanging weights from my late teens, without any noticeable success, due to a lack of effort.
I found that some form of cock ring enhanced my erections resulting in better sex, and if used for long periods showed some early gains.
I kept a log of my gradual success, but destroyed it when a found a fellow employee snooping about my desk, and pretty much gave up.
It wasn’t until the advent of the WEB and the available mountain of information and popularity of PE that I even considered anything commercially available.
The original JES extender caught my eye a few years back but the price kept me away.
I engineered a substitute utilizing hardware, bought the parts but never built it due to the bulky nature of it.
Once the knockoff extenders, pumps and tubes became available at an affordable price I was on my way.
My postings summarize my efforts, methods and success.
One bit of advice I got recommended the PeniMaster or Phallosan to alleviate the pain from wearing my extender for prolonged periods.
Once again, the price keeps me away.
This time I do not see any viable engineered home made substitute.
After much analysis I have decided on the following plan to achieve my 10.5 BPEL, without any further gains in girth.
When I initially started pumping, I went for the standard 9 inch tubes, with 1.75 inch diameter.
I used them successfully, but started to get pretty snug inside the tubes.
I also realized that my goal of 10.5 BPEL would max out the tube.
My plan is to purchase slightly larger diameter tubes, 2.0 and 2.25 inches in diameter which are 12 inches long.
The 2.0 will not allow any further girth gains, I’ll just have to lube it well.
As stated in my initial posting, I have always been into some form of PE, generally do it yourself attempts by an engineering mentality.
I tried hanging weights from my late teens, without any noticeable success, due to a lack of effort.
I found that some form of cock ring enhanced my erections resulting in better sex, and if used for long periods showed some early gains.
I kept a log of my gradual success, but destroyed it when a found a fellow employee snooping about my desk, and pretty much gave up.
It wasn’t until the advent of the WEB and the available mountain of information and popularity of PE that I even considered anything commercially available.
The original JES extender caught my eye a few years back but the price kept me away.
I engineered a substitute utilizing hardware, bought the parts but never built it due to the bulky nature of it.
Once the knockoff extenders, pumps and tubes became available at an affordable price I was on my way.
My postings summarize my efforts, methods and success.
One bit of advice I got recommended the PeniMaster or Phallosan to alleviate the pain from wearing my extender for prolonged periods.
Once again, the price keeps me away.
This time I do not see any viable engineered home made substitute.
After much analysis I have decided on the following plan to achieve my 10.5 BPEL, without any further gains in girth.
When I initially started pumping, I went for the standard 9 inch tubes, with 1.75 inch diameter.
I used them successfully, but started to get pretty snug inside the tubes.
I also realized that my goal of 10.5 BPEL would max out the tube.
My plan is to purchase slightly larger diameter tubes, 2.0 and 2.25 inches in diameter which are 12 inches long.
The 2.0 will not allow any further girth gains, I’ll just have to lube it well.