I'll happily register my interest, I've had visions of buying a goliath and modding it with the pump assembly from an extreme. Would be so difficult and expensive. Some websites quote the internal max size of the x40 xtreme as 11.5" but I think this must be with an uncompressed gaiter, as other sites claim 8.5". One day I'd like to get to 10" length, even if it takes me 10 years. would be good to have a bathmate that could handle that
 
Have you looked @ the winevac mod for trying to replicate the xtreme version?

I heard the x40 was 9.5-10"EL and 7"EG.
 
I did try and mod my hercules with the winevac mod, I don't know whether the seal I got was slightly the wrong size or I did something wrong, but for whatever reason it just would not stay affixed. tis a shame really. maybe the next generation of bathmates could have interchangeable components so you could tailor make them to what you want from them. I was thinking that a bathmate could have a screw thread and two sections of plastic above the gaiter, that you could turn and lengthen to use the chamber as a length exercise. I wonder if that would work
 
growingwriter;617098 said:
I did try and mod my hercules with the winevac mod, I don't know whether the seal I got was slightly the wrong size or I did something wrong, but for whatever reason it just would not stay affixed. tis a shame really. maybe the next generation of bathmates could have interchangeable components so you could tailor make them to what you want from them. I was thinking that a bathmate could have a screw thread and two sections of plastic above the gaiter, that you could turn and lengthen to use the chamber as a length exercise. I wonder if that would work


Here are a few alternative sealing options if the rubber stopper thing from the vac mod wasn't working for you.

Silicone sleeve piece: http://www.mattersofsize.com/forum/...ump-forum/83589-wine-vac-help.html#post590781
VLC: http://www.mattersofsize.com/forum/...to-increase-vacuum-pressure-8.html#post611043
O-ring: http://www.mattersofsize.com/forum/...to-increase-vacuum-pressure-8.html#post611228


Would be nice if the accessories were sold separately and were interchangeable w/ different BM versions.
A BM tube option w/ a screw adapter for adding more length would also be a genius idea. Then they could just sell sections for upgrades. Just like how extenders have rod extensions.

Would be good ideas to send them.
 
growingwriter;617088 said:
I'll happily register my interest, I've had visions of buying a goliath and modding it with the pump assembly from an extreme. Would be so difficult and expensive. Some websites quote the internal max size of the x40 xtreme as 11.5" but I think this must be with an uncompressed gaiter, as other sites claim 8.5". One day I'd like to get to 10" length, even if it takes me 10 years. would be good to have a bathmate that could handle that

the x40 will take you to around 9.5 inch in length, and 6.9 inch in girth, depending on the level of temp gain you get.

bathmate probably wont make an x50 as there isnt enough demand for it compared to the x30 and x40. they may prove me wrong, but it probably wont happen atleast for a little while
 
smerc;617106 said:
Here are a few alternative sealing options if the rubber stopper thing from the vac mod wasn't working for you.

Silicone sleeve piece: http://www.mattersofsize.com/forum/...ump-forum/83589-wine-vac-help.html#post590781
VLC: http://www.mattersofsize.com/forum/...to-increase-vacuum-pressure-8.html#post611043
O-ring: http://www.mattersofsize.com/forum/...to-increase-vacuum-pressure-8.html#post611228


Would be nice if the accessories were sold separately and were interchangeable w/ different BM versions.
A BM tube option w/ a screw adapter for adding more length would also be a genius idea. Then they could just sell sections for upgrades. Just like how extenders have rod extensions.

Would be good ideas to send them.

It would be nice, but no fing way would they do it. What's the going Rate for a xx30? Like 399... F that. They have no reason to sell us dudes a hand pump for 75-150 when we can just vac mod. I'm sure if they do end up making some down the line, they won't be affordable. They will however be bought by people who don't want to spend the time or headaches to mod their BM themselves.

As an aside, I you Re having an issue with keeping your adapter affixed to you BM? Fuck it. You can still hold it over the end with a firm, but gentle amount of pressure as not to set off the valve, and draw up with the wine vac to pull out some h20 and increase your pressure.
 
x30 xtreme = $300
x40 xtreme = $350

Yeah, it would probably hurt them in the long run doing it like that.
However, they could benefit on lost $$$ from people not being able to afford the upgrades and just not buying all-together.

End in the end, a lot of people will shell out the money regardless. So there probably isn't much incentive to make things that profitable.
They really own the market on water pumps.
 
I just had the idea mainly that their system could be modified to also benefit length greatly as well. You do get a bit of length from bathmate work and you can use it to do specific exercises that help, but I was thinking that this modification would really help.

You could leave the unit static and pump it for a girth routine, and then for a length routine set it so the screw is at the minimum point - establish a small amount of pressure and then use the screw action to concentrate the pump force along the length. It seems like it would work, I wonder if it would help
 
growingwriter;617134 said:
I just had the idea mainly that their system could be modified to also benefit length greatly as well. You do get a bit of length from bathmate work and you can use it to do specific exercises that help, but I was thinking that this modification would really help.

You could leave the unit static and pump it for a girth routine, and then for a length routine set it so the screw is at the minimum point - establish a small amount of pressure and then use the screw action to concentrate the pump force along the length. It seems like it would work, I wonder if it would help

im not quite getting the explanation. i was under the impression that for a pump to be good for length it has to be long and thin, but it wouldnt be possible to get a pump with variable girths
 
View attachment 29763

Like this. Your gaiter would be attached to the bottom of this, and then a second outer piece would slot in around these screw grooves. It steps so the backward pressure cant slowly screw it open.
 
jordey;617137 said:
im not quite getting the explanation. i was under the impression that for a pump to be good for length it has to be long and thin, but it wouldnt be possible to get a pump with variable girths

It does. I think he means length extension though. That was the first explanation. Didn't quite get the 2nd one.


Was thinking something like this. Where it's 8" in total length, then you purchase an adapter that can screw onto the screw section and make it 10+" length.
Untitled.jpg
 
Third times a charm?


Upload to postimg.org or another image host. Then use the above img attributes and see if that works. That's what I do.
 
I see. Like an adjustable cone/tube. Looks like a pain in the ass.
Don't think it would hold up w/ vacuum pressure, but I'm not a master of construction so I could be wrong given that it had the right materials.
 
maybe. if the entire tube assembly was manufactured and sold as one piece it'd be a lot easier, and you could swap out the gaiter as a screw on and the pump as a screw on to the top of the tube. then you could have many girths for the same pump valve, at least
 
growingwriter;617153 said:
maybe. if the entire tube assembly was manufactured and sold as one piece it'd be a lot easier, and you could swap out the gaiter as a screw on and the pump as a screw on to the top of the tube. then you could have many girths for the same pump valve, at least

isnt that sort of what the penomet is? you can change all the gators on them
 
Back
Top Bottom